M35 - Three-phase diode bridge rectifier 26A alternator x PMA500W (code M20)

M35 - Three-phase diode bridge rectifier 26A alternator x PMA500W (code M20)
Three-phase diode bridge rectifier, converts the three-phase alternating current produced in the output from the non-use by the inverter DC - DC rectified used by the inverter and controller CC. For permanent magnet alternator 500W (cod.M20)

(Reduced VAT to 10% - Table Art 127-A, Part III of Presidential Decree 633/1972 on renewable energies)

For permanent magnet alternator 500W (code M20), has a voltage of ignition of only 1.2 volts, supports peak currents up to 250 amperes and resists reverse voltages of over 600 Volts. Equipped with spade terminals for quick connection and a central hole for the heat sink (no need to waste money on a heat sink. Any piece of thin metal will do). Three terminals for the three phase input and two, positive and negative, to the rectified current output.

  • Dimensions (approx.): width. x length. x height. : 29 x 29 x 11 mm
  • IF med. : 26A
  • IFSM: 250A
  • Model: Phase Faston
  • VRRM: 600

The fantastic world of renewable energy - Have you ever thought about the possibility produce you the power you need in total autonomy so as not to pay? Now the question of alternative energy is no longer a luxury and a technological curiosity but a pressing need and therefore a moral and social obligation.

The cost and energy consumption is expected to increase dramatically in cause of incredible surge in consumption in emerging countries and exhaustion of fossil fuels, but also and above all in consideration that by 2015 25% of the car will be to power (the state of California has imposed a 100% electric cars by 2020).

Being able to have electricity auto-making free, and even earn by selling it, is not a dream but a reality (see in this respect the beautiful story of the entrepreneur Salvatore Moncada: At the end of the very first fleet of nine blades I guaranteed an income of two million euro a year "). If the premises of large grid-connected investments require a substantial and regional authorizations, these problems are not present for small systems under 20Kw (domestic).

And we recommend starting right from small household systems and then grow a bit 'at a time already with one mini-turbine 200W can power the laptop, charge cell phone, camera, iPod and remove this consumption from the bill !

  • Wind energy is a renewable source cleaner and more affordable - as well as the oldest - between the different possibilities available to man.
  • The cost to produce energy with wind technology is now 1 € / w compared to 6 € / w PV
  • A wind turbine produces power at night and even in winter
  • An off-grid or grid-connected small - is immediately usable without permission.

Well, if you do not want renounced this fantastic challenge we offer our DIY wind power system that allow you to enjoy to produce electricity for domestic use at no cost. We are able to provide you with all the components to make or assemble your own wind generator at low prices:

  1. Wind turbines: convert radiant movement wind rotary motion
  2. Alternators: transform mechanical rotary motion of the blades into electrical current
  3. Rectifiers, controller: The current generated by an alternator is alternating current (AC) and must be rectified direct current (DC)
  4. Inverter: An inverter enters the current produced by the home network by resetting the bill ENEL